Dosage:
Initial Dosage: Use 150ML product per 10,000 Litres.
Maintenance Dosage: Use 80ML product per 10,000 Litres every seven days.
Heavy Algae Growth/Winter Dose: Use 300ML per 10,000 Litres.
A few facts from the professionals...
Miraclear Algaecide does not contain any trace metals.It is therefore ideal for Ionised pools and Nature 2 pools and spas.
It is non foaming and non staining so is an ideal algaecide for fountains and ornamental ponds.
Unlike other non copper algaecides it does not contain Alkyl Dimethyl Benzyl Ammonium Chloride.
It is therefore ideal for salt pools and pools with high combined chlorine levels.
Dosage:
500MLÂ treats 60,000 Litres pool water
Â
Dosage rates:
250ML per 50,000 Litres pool water
Use once every 30 days
Directions for use:
Shake bottle before using.
With the pump running, add 250ML per 50,000Litres of water.
For best dispersion, add Solar Shield in front of pool return line or to skimmer.
Run the pump daily for proper circulation.
Dosage Charts
INITIAL DOSE:
Add STARVER® at a rate of 500ml per 50,000 Litres of pool water every 2-3 days.
(If Phosphate level is 1ppm or higher, it is recommended to use companion product STARVER®X to reduce levels to beneath1ppm then to recommence using STARVER®)
The required dosage of STARVER®should be added until you nish the container you have been supplied.
Once you have completed the treatment, take a water sample to be tested for phosphates by your local pool professional.
MAINTENANCE DOSE:
Once you have achieved the desired phosphate level (0-0.2 ppm) , a regular maintenance dose of STARVER® shouldbe applied.
Add a regular maintenance dose of 500ML of STARVER® per 50,000 Litres pool water every 2 weeks.
REGULAR PHOSPHATE CHECKS should be carried out by your local pool professional.
Dosage:
Add 200ML per 10,000Litres directly to the skimmer box
Dosage:
2.5L treats 50,000 litres pool water
A few facts from the professionals...
1. Advise pool owner that product may foam and smell for up to 10 days.
2. Reduce pH to 7.2 for best results.
3. Use with Starver® Pool Maintenance for badly infested pools.
4. Note: High doses of quaternary ammonium compound may combine with free chlorine, resulting in excess levels of combined chlorine. This phenomenon lasts 2 or 3 days.
5. Addition of Lo-Chlor Aqua-Boost is recommended if condition persists.
6. When added to a pool running with a salt chlorinator the ammonia occasionally reacts with the gases produced in the salt chlorinator cell causing fine bubbles to form on the surface of the pool.
7. These bubbles will dissipate as soon as the chlorinator is switched off and usually only last 5-7 days.
Dosage:
2.5L treats 50,000 litres pool water
A few facts from the professionals...
1. Advise pool owner that product may foam and smell for up to 10 days.
2. Reduce pH to 7.2 for best results.
3. Use with Starver® Pool Maintenance for badly infested pools.
4. Note: High doses of quaternary ammonium compound may combine with free chlorine, resulting in excess levels of combined chlorine. This phenomenon lasts 2 or 3 days.
5. Addition of LoChlor Aqua-Boost is recommended if condition persists.
6. When added to a pool running with a salt chlorinator the ammonia occasionally reacts with the gases produced in the salt chlorinator cell causing fine bubbles to form on the surface of the pool.
7. These bubbles will dissipate as soon as the chlorinator is switched off and usually only last 5-7 days.
Â
Dose:
500ML every 3 months
Add 500ML of AQUAGUARD C.S.M. to 50,000 Litres of pool water to soften any build up that has formed. Do so with the pump and filter running so that AQUAGUARD C.S.M. can make its way through the filtration system of the pool and distribute evenly to make sure that all surfaces of the pool and equipment are covered.
Dose:
500ml every 3 months
Add 500ml of Aquaguard CSM to 50,000 Litres of pool water to soften any build up that has formed.Â
Do so with the pump and filter running so that Aquaguard CSM can make its way through the filtration system of the pool and distribute evenly to make sure that all surfaces of the pool and equipment are covered.
Â
Dosage:
1L treats 50,000L
A few facts from the professionals.
Concentrated Black Spot Algae Killer is a combination of the organo copper complex contained in Lo-Chlor Pool Algaecide together with the proven agent, Alkyl Dimethyl Benzyl Ammonium Chloride.
Both are very effective anti-algae treatments. Combined they will overcome the most resistant of algae strains.
As the compound suggests this blend contains ammonia.
When added to a pool running with a salt chlorinator the ammonia occasionally reacts with the gases produced in the salt chlorinator cell causing fine bubbles to form on the surface of the pool.
These bubbles will dissipate as soon as the chlorinator is switched off and usually only last 5-7 days.
Â
Directions for use:
Refer to instructions on chemical container.
Great savings on selected products, check-in often for updated lists.

Once submitted, your pool/spa details will be entered into our sizing calculator along with your local weather details provided by the “Bureau of Meteorology”. A personalise evaluation will be emailed to you within 1-2 business days by a Sensaheat product specialist.