No products in the cart.
Clearchem Hardness increaser 25kg *PICK UP ONLY*
SKU: CH-HARD25Application:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
Clearchem Hardness Increaser 2kg
SKU: CH-HARD2Application:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
Clearchem Hardness increaser 4kg
SKU: CH-HARD4Application:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
Clearchem Hardness Increaser 8kg
SKU: CH-HARD8Application:
Product should be pre-dissolved in a bucket of water adding 2KG to 5 Litres of water
If more than 6KG is needed per 50,000 Litres of pool water dose separately and apply at least 12hrs apart
Dosage:
100GM will raise the Calcium Hardness by 10ppm per 10,000 Litres
Dosage rates indicated are only a guide
Clearchem Stabilised Chlorine 10kg
SKU: CH-SC10Application:
Dissolve granules in water prior to use and add directly to water
Dosage:
Initial start-up dose is 100 - 170gms per 10,000 litres
Then apply a daily dose of 25 - 30 gms per 10,000 litres
Dosage rate are only a guide
Clearchem Stabilised Chlorine Tablets 2kg
SKU: CH-SCTABS2Application:
One tablet per 20,000Litres placed in a floating tablet dispenser
Dosage rates indicated are only a guide
Clearchem Sun Screen 2kg
SKU: CH-STAB2Application:
May be added slowly via the skimmer box with the pump running
Run pump for a minimum of 8 hours
May be added directly to the pool.
Mix in a bucket of water first and then broadcast over entire pool surface
Pool may go cloudy for a short period but will clear within 8 hours
Cyanuric acid may take up to 24 - 36 hours to dissolve completely
Level of cyanuric acid should be tested every 6 - 8 weeks depending on rainfall
Dosage:
Add 100gm per 10,000 Litres to raise Cyanurate level by approximately 10ppm
Dosage rates indicated are only a guide
Concentrated Black Spot Algae Killer 20L *PICK UP ONLY*
SKU: LC-50BSK20L*PRODUCT IS DG AND CAN NOT BE SHIPPEDConcentrated Black Spot Algae Killer 20L This highly concentrated blend is ideal for light and heavy infestations of black spot algae in all types of swimming pools. Features & Benefits– Use for the treatment of severe, resistant algae...
- 
Floc 20Ltr *PICK UP ONLY – NSW*
SKU: CH-FLOC20THIS PRODUCT IS ONLY AVAILBLE FOR PICK-UP FROM OUR NSW LOCATION Floc 20Ltr
- 
Liquid Chlorine 15L *DG*
SKU: CH-CHLOR15*DG, PICK UP ONLY**$10 drum deposit charged Liquid Chlorine 15L (Sodium Hypochlorite)Active ConstituentSodium Hypochlorite (10% and 12.5%)Features & BenefitsExtremely economical and easy to useUsed for sanitising pool water on a daily basisProduced from salt so highly compatible with salt chlorinationInstantly solubleNo residueDosageFollow label instructions
- 
Lo-Chlor Anti Crystallite 1L
SKU: LC-60AC1LDosage:
Read directions on bottle for dosage rates and instructions.
Lo-Chlor Anti Crystallite contains a blend of potassium permanganate and other rare compounds. These metallic compounds can cause mild staining.
If staining occurs, an addition of Lo-Chlor Multi Stain Remover followed up by Lo-Chlor Metal Solution will remove such stains within minutes.
Do not overdose!
Read directions on bottle for dosage rates and instructions
